Access Control Installation for Auckland Businesses
Fobs, keypads, maglocks, and the wiring behind them. The Conduction Company installs access control hardware for Auckland commercial sites, does the electrical work properly, and certifies it. You choose the system; we make it work.
Are You Experiencing Problems with Access Control?
Keys stay in circulation long after the people holding them have moved on, and one that goes missing can mean rekeying a whole building. Meanwhile the hardware turns up with nobody to wire it in, the cabling gets forgotten until the walls are lined, a gate has no remote for the people who use it, and a reader, keypad, or strike stops working with nobody clearly responsible for the power and cabling behind the doors. The door changeovers that would fix it then have to happen during trading hours, which is the one time they cannot.
The Conduction Company installs readers, keypads, electric strikes, maglocks, and remotes on Auckland commercial sites, runs the cabling, power, and containment behind them, and certifies the work alongside CCTV cameras where a site needs both.
Access Control Hardware The Conduction Company Installs
Access control at Auckland businesses is electrical work, and The Conduction Company installs the readers, keypads, electric strikes, and maglocks along with the cabling, power, and containment behind them. Designing or specifying a security system is separate, licensed work, so where a consultant or integrator has specified one, the job here is putting it in.
What access control work does The Conduction Company install?
The Conduction Company installs access control hardware and does the electrical work behind it. That means readers, keypads, electric strikes, maglocks, and remotes, plus the cabling, the power supplies, and the containment, all installed and tested. Where the job includes work on the building's mains supply, we certify that work.
Our workmanship is backed for life by the Lifetime Workmanship Guarantee. The hardware carries its manufacturer's warranty, which is a separate thing.
Proximity readers, keypads, and access remotes
The Conduction Company installs the devices people use to get through a door or gate, and wires and powers each one.
Proximity and RF readers respond to a fob, a tag, or a card at the door. Keypads take a code at a door, a gate, or a server room, and we install the containment and supply that sit behind them. Access remotes are handheld openers for gates, barriers, and doors; we install the receiving side and the supply to it.
Electric strikes and maglocks
The Conduction Company fits electric strikes and maglocks, and the wiring that drives them.
An electric strike is the electrically released latch that lets a door open on a valid read. A maglock is an electromagnetic lock that holds a door closed until the system releases it. That makes the power supply and the release path part of the safety design, so we install the electrical side that goes with each lock.
Who does the cabling, power, and containment for access control?
The Conduction Company runs the cabling, installs the power supplies, and puts in the containment, labelled and tested. This is the part that makes access control electrical work rather than a hardware supply.
It is power and cabling in a commercial building, so we use registered electricians and certify the mains side, rather than leaving it to whoever supplied the hardware.
Can access control go in during a fitout or new build?
Yes, and it is the cheapest time to cable a door, before the walls close. The Conduction Company runs access control cabling as part of a commercial fitout or new build.
We already do the lighting, the data, the switchboard, and the fitout work on commercial sites, so access control goes in alongside it, on one quote.
Does The Conduction Company install intercoms and video door stations?
Yes. The Conduction Company installs intercoms and video door stations alongside access control where a site needs both.
Does The Conduction Company design or recommend access control systems?
No. The Conduction Company does not design or specify security systems. Advising a client on what security system they should have is licensed work under the Private Security Personnel and Private Investigators Act 2010, and it is a separate activity from installing it. If you have a security consultant or an integrator, we install what they have specified and work with them.
We do not monitor anything either. There is no monitoring station and no response contract.
Can access control work be done outside trading hours?
Yes. The Conduction Company books disruptive access control work outside a client's trading hours, so doors that have to keep working during the day can be changed over at night.
What affects the cost of an access control installation?
The Conduction Company prices access control on how many doors there are, what hardware goes on each one, how far the cable runs have to travel, and how hard the building is to get cables through. A fitout with open walls and a tenanted building with a fixed ceiling are very different jobs, so we quote after attending site.
We quote on facts, not guesses
Before we give you a price, we carry out a proper assessment of your property and how you'll use the access control system.
That way you know exactly what you're buying and the total cost, with no surprises.
Clear expectations from the outset, start to finish.
What are the three types of access control?
The Conduction Company installs three types of access control at the door: proximity readers, keypads, and handheld access remotes.
A proximity reader opens for a fob, tag or card, a keypad takes a code, and a handheld remote opens a gate, barrier or door. Each works with the electric strike or maglock that holds the door, and The Conduction Company installs the wiring, power and containment behind them. Choosing the system is licensed security consultant work, so The Conduction Company installs what the client or their consultant has chosen.
How The Conduction Company runs a commercial job
Site Visit
The Conduction Company walks the site, counts the doors, and works out the cable routes.
Fixed Price Quote
The Conduction Company gives you one quote covering the hardware installation, the cabling, and the power.
Install, Test, and Certify
The Conduction Company installs, tests, labels, certifies, and hands over.
Frequently Asked Questions
Can you tell me which access control system to buy?
No, and the reason matters. Advising on what security system a client should have is licensed work under the Private Security Personnel and Private Investigators Act 2010, which is a separate activity from installing it. The Conduction Company installs what you or your consultant have chosen, and does the electrical work behind it properly.
What access control hardware do you install?
Proximity and RF readers, keypads, electric strikes, maglocks, and access remotes, plus the cabling, power supplies, and containment behind them. The Conduction Company stocks that hardware and installs it as electrical work.
Do you monitor the system or respond to alarms?
No. The Conduction Company installs and services the hardware. We do not run a monitoring station and we do not hold response contracts.
Can you add access control to a building that is already occupied?
Yes, and that is most of this work. The Conduction Company works out the cable routes through an occupied building first, because access is the single biggest cost driver on a retrofit.
Don’t just take our word for it, we have a 5/5 rating on Google
and a 99.8% approval rating on NoCowboys
Affordable, professional! 100% recommend Thank you Keagan for a fab job, arrived on time, very respectful, tidied up. Will definitely use again 👍
The team did a great job as usual - on time and done for the same price quoted. Great communication, tidied up afterwards, happy to answer any questions we had. Highly recommend.
So these guys are GREAT. Everyone was helpful, responsive and professional. The job was sorted super quick and my boisterous doggo was given plenty of attention too. Totally recommend them and thanks everyone for being so lovely to deal with.
Great communication - knew that we needed job completed ASAP so they fitted us in around other jobs which was highly appreciated. Professional and friendly
They do what they say they will do and fix what they say they will fix. Very responsive and professional.
Great service, am was very knowledgeable and listened to what I was teling him. Great Price and great service.
Prompt and friendly communication from quoting to completing the work. Storm damaged aerial replaced and working well. Thank you!
A nice friendly group to deal with. Prompt response and kept informed of what was being done. A couple of hiccups but dealt with promptly and with a smile.
The electrician was very professional and reliable. We installed timer for hot water cylinder. The price was reasonable with longer period of warranty while the other company only provided 1 year. Would recommend to everyone!
Excellent service from this company. Got quick and informative responses to all my messages. Staff were friendly and kept me informed on how far away the service guys were, what their names were etc. I highly recommend The Conduction Company.
Excellent in every way! Amazing communication around the quote, appointment booking and arrival. The guys were polite and friendly and most importantly extremely clean after they finished. I would recommend and will use them for all electrical work going forward.
The Conduction Company is great. Super quick, professional, friendly, reliable, know what they are doing. I’ve used these guys a few times over the years and always had a job done just as I needed. Highly recommended ⚡💥
We had a fire at our property and the technician responded quickly to isolate the power, got in to get the job done and power was restored to the whole house within an hour. Thanks guys!!! Highly recommend The Conduction Company.
These guys are personable, professional and hugely patient with me and my questions. I was very impressed with the quality of workmanship and their attitude with works. Many thanks to the team for a seamless project and prompt communication!
So helpful on the phone, and solved the issue really quickly, it was wonderful. Excellent communication skills, and thorough knowledge of what was probably the issue, sorted out in no time.
100% recommend this company. Their professionalism, communication, and competence are outstanding. So good to have trades that you can trust to do a fantastic job.
Jordan and team recently did the re-wiring of our house, I’m very pleased with the quality of the work. I would give them a six star if I could! Highly recommend.
Just a small job of installing a new power outlet and a security light. Superb communication and quality of work. Would definitely use their services again.
What a great experience from start to finish. Jordan who came to quote was very helpful and knowledgeable, giving us great ideas for what we could apply in our home. The quote was thorough and detailed, booking was easy, kept us updated the whole time.
Such a good experience with The Conduction Company - they went above and beyond for us, managing to fit us in at short notice and doing a great job with the whole project, including the numerous parts we added. Really happy with these guys, will be using again for future projects
Recent projects
Need Access Control Installed?
The Conduction Company installs access control hardware on Auckland commercial sites and does the electrical work behind it, from a single door to a whole building.
One company for the doors, the cabling, and the switchboard work, backed by our Lifetime Workmanship Guarantee. Get in touch and one of the team will come back to you the same day, depending on staff availability. The Conduction Company is reachable any hour of the day, every day of the week.