Electrical projects and case studies

These are real projects by The Conduction Company, from a bakery store fit-out in Oratia to underground power for a site office in East Tamaki. Each one gives the scope, the dates, and the crew hours, taken from The Conduction Company's own job records. Where a price is shown, it is the project's actual total, including GST.

Oratia

Crafty Baker new store electrical fit-out, Oratia

The Conduction Company wired Crafty Baker's new bakery store in Oratia, from bare timber frame to fit-off, over 35 site days. The job ran in monthly stages from June to December 2025.

East Tamaki

Underground power and fibre for a site office, East Tamaki

The Conduction Company ran underground power and a fibre duct to a portable site office on a business site in East Tamaki, then fitted a new meter and switchboard. The work took 7 site days between February and June 2026.

New Lynn

Office renovation electrical, New Lynn

The Conduction Company wired a full commercial office renovation in New Lynn, from new framing to fit-off, working alongside the builders from February to May 2024.

Auckland CBD

Emergency lighting replacement, central Auckland apartments

The Conduction Company replaced the emergency lighting in an apartment building in central Auckland over 3 site days in July 2025. Every fitting passed a 90-minute test of the full system.

Eden Terrace

Power for two warehouse air conditioning units, Eden Terrace

The Conduction Company delivered an air conditioning project for an open-plan warehouse tenancy in Eden Terrace and did the electrical work. A specialist air conditioning subcontractor installed the two units.

Massey

Heat pumps, ventilation, CCTV and alarm in one home, Massey

The Conduction Company fitted two heat pumps, a SmartVent home ventilation system, CCTV, and a new alarm in one Massey home in July 2025. Four of its own team did the work over 5 site days.