Test and Tag in Auckland
The Conduction Company tests and tags appliances and leads for Auckland landlords, property managers, and commercial sites. Tested to AS/NZS 3760, tagged on the spot, and handed back with compliance records you can actually produce when someone asks for them.
Are You Experiencing Problems with Test and Tag Compliance?
A tag with no register behind it proves nothing when an insurer or an auditor asks, and gear that has not been checked since it arrived is usually the gear that hurts someone. Out of date tags turn up mid health and safety audit, nobody can produce the records, and nobody knows when the next retest is due. Appliances sit in tenanted properties with no compliance record, site gear takes a beating with nothing checked since the day it arrived, a failed lead comes back as a problem to sort out yourself, and the testing that would settle all of it interrupts the whole office for a day.
The Conduction Company tests and tags to AS/NZS 3760 on Auckland commercial sites and in rental properties, then hands over records you can actually produce.
Test and Tag Services in Auckland
The Conduction Company tests and tags portable appliances, leads, and extension cords to AS/NZS 3760, across Auckland offices, rentals, and construction sites. The Conduction Company is an electrical contractor with registered electricians, so anything that fails can be repaired and certified by the same company rather than handed back as a list of problems.
What does test and tag cover?
The Conduction Company tests portable appliances, leads, and extension cords to AS/NZS 3760, on site at your premises. Each item is tagged with the result and its retest date.
AS/NZS 3760 sets what a tag must show as a minimum: who did the test, the test date, a retest date, and a reference to the standard. It covers more than the obvious appliances, too. Battery chargers, cord sets, and extension leads all come under it.
How much does test and tag cost?
The estimate below is for standard test and tag work.
The Conduction Company confirms final pricing after a property assessment.
From $9.19 per tag, including GST: The Conduction Company's standard rate covers the test, the tag, and the labour to do it.
What a whole site costs depends on how many items there are and how spread out they are. That is why we quote the job rather than the item.
We quote on facts, not guesses. Before we give you a price, we carry out a proper assessment of your property and how you'll use the testing. That way you know exactly what you're buying and the total cost, with no surprises. Clear expectations from the outset, start to finish.
What records do you get after test and tag?
The Conduction Company hands over a compliance register, not just tags on leads. It shows what was tested, what passed, what failed, and when each item is due again.
A tag on a lead is no use to you if there is no record behind it. When a landlord, an insurer, or a health and safety audit asks for the records, they exist.
What happens to items that fail testing?
Anything that fails is labelled and taken out of service, as AS/NZS 3760 requires. The Conduction Company is an electrical contractor, so it can repair or replace a failed lead or appliance rather than just handing you a list of problems.
Whatever a test turns up can be fixed by the same company instead of being referred on. The standard leaves the call with you, the owner or the person responsible for safety on site: repair it, replace it, or get rid of it.
Which sites do you test and tag?
The Conduction Company tests and tags offices, workshops, retail, hospitality, rental properties, and construction sites. On a commercial site we work through methodically, so nothing gets missed and nothing gets tested twice.
For landlords and property managers with appliances in tenanted properties, we test across a portfolio and keep the records together rather than per property. Construction gear takes a beating and gets tested more often because of it, so we test it on the interval the site needs.
Test and tag can sit alongside switchboard work, emergency lighting, and maintenance, so a site has one electrical contractor rather than four.
How often does equipment need retesting?
It depends on how hard the equipment is used, and The Conduction Company sets a retest schedule to match. An office and a building site are not on the same interval.
AS/NZS 3760 sets indicative intervals by type of environment, and a responsible person can vary them after a risk assessment. Once the schedule is set, we come back when items are due.
Can test and tag happen outside trading hours?
Yes. The Conduction Company books test and tag outside a client's trading hours where that suits. Working through a site with a tester is disruptive during business hours. After-hours work may cost more than the standard rate, and we confirm that in the quote.
How The Conduction Company runs a commercial job
Tell Us the Site
Roughly how many appliances and leads, and where they are. The Conduction Company quotes from that.
Testing On Site
The Conduction Company tests to AS/NZS 3760 and tags as we go, arranged around how you work.
Records and Retest Date
You get the register and the next retest date. The Conduction Company comes back when it is due.
Frequently Asked Questions
How much does test and tag cost?
From $9.19 per tag including GST. That covers the test, the tag, and the labour. A whole site depends on the item count and the layout, so The Conduction Company quotes the job after knowing what is there.
What standard do you test to?
AS/NZS 3760, which is the New Zealand and Australian standard for in-service safety inspection and testing of electrical equipment. The Conduction Company tags each item with the result and the date it is next due.
How often does equipment need retesting?
It depends how hard the equipment is used. The Conduction Company follows the interval table in AS/NZS 3760: factories and workshops every 6 months; gear whose cords flex, get knocked about, or work in a hostile environment every 12 months; equipment that is never flexed or abused up to 5 years; hotels, motels and hostels every 2 years; commercial cleaning gear every 6 months; hire gear before every hire and every 3 months. Construction-site gear is every 3 months under AS/NZS 3012. Most of The Conduction Company's office clients are on a 12-month round.
What happens if something fails?
It comes out of service and gets tagged as failed. The Conduction Company can repair or replace a failed lead or appliance, because we are an electrical contractor rather than a testing company, so it does not turn into a second job with a second supplier.
Don’t just take our word for it, we have a 5/5 rating on Google
and a 99.8% approval rating on NoCowboys
Highly recommend The Conduction Company! So organised and clear about everything that needed doing! The guys showed up on time and Reuben was so knowledgeable about our SmartVent system and took the time to explain everything to us!
Highly recommend The Conduction Company for installing and mounting a tv. Fast and reliable service. Professional people. Great communication and price.
The Conduction Company is great. Super quick, professional, friendly, reliable, know what they are doing. I’ve used these guys a few times over the years and always had a job done just as I needed. Highly recommended ⚡💥
So these guys are GREAT. Everyone was helpful, responsive and professional. The job was sorted super quick and my boisterous doggo was given plenty of attention too. Totally recommend them and thanks everyone for being so lovely to deal with.
We had The conduction company involved with our bathroom renovation and we’re stoked with the service! Great communication and workmanship.
This is the 3rd time we have used this local company & would recommend them . Definitely our 'go to' for any electrical work required.
The Conduction Company was great. Answered every question I had and have had no problems since they installed the ethernet cabling run about 7 months ago
The team did a great job as usual - on time and done for the same price quoted. Great communication, tidied up afterwards, happy to answer any questions we had. Highly recommend.
Service was great. Before doing job suggested we contact Vector to see if it was their mistake. All communication was great and the young man that did the job was super efficient and helpful, explaining procedure as he went. Highly recommended A1
The electrician was very professional and reliable. We installed timer for hot water cylinder. The price was reasonable with longer period of warranty while the other company only provided 1 year. Would recommend to everyone!
We could not fault this company. Full communication throughout, arrived on time, did the job in a less time than expected, a nice touch being presented with a "thank you" gift before leaving. The men were super friendly. Would definitely recommend !
Affordable, professional! 100% recommend Thank you Keagan for a fab job, arrived on time, very respectful, tidied up. Will definitely use again 👍
Prompt and friendly communication from quoting to completing the work. Storm damaged aerial replaced and working well. Thank you!
Had a small job completed, tradesman was on time and completed the the work quickly. Communication was great especially around booking the work in and was kept up to date as to when they would be arriving.
Jordan and team recently did the re-wiring of our house, I’m very pleased with the quality of the work. I would give them a six star if I could! Highly recommend.
understood our problem, suggested the fix, quoted promptly, did the work without delay. all round good service
So helpful on the phone, and solved the issue really quickly, it was wonderful. Excellent communication skills, and thorough knowledge of what was probably the issue, sorted out in no time.
Jordan provided super helpful advice over the phone regarding electrical compliance of our campervan with no obligation. He and his team provided an efficient and friendly service in checking and issuing an EWOF. Would definitely recommend!
Great communication - knew that we needed job completed ASAP so they fitted us in around other jobs which was highly appreciated. Professional and friendly
fantastic service! They helped me out in an emergency last year and so i rang them when i needed work done in my new place. Got everything done on time and at a reasonable price. i shall definately use them again
Recent projects
Need Test and Tag Sorted?
The Conduction Company tests and tags appliances and leads to AS/NZS 3760 across Auckland, for landlords, property managers, and commercial sites, and hands over a compliance register you can produce when someone asks for it.
One electrical contractor for the testing, the repairs, and the rest of the site, backed by our Lifetime Workmanship Guarantee. Get in touch and one of the team will come back to you the same day, depending on staff availability. The Conduction Company is reachable any hour of the day, every day of the week.