Audio Visual and Speaker Installation in Auckland

Audio visual and speaker installation across Auckland

The Conduction Company installs audio visual systems across Auckland. For businesses that means in-ceiling speakers and background music, projectors, and HDMI to the meeting room screen. For homes it means home theatre, speakers, aerials, and finding out why the picture or the sound has stopped. Its registered electricians run the power and the AV cabling in the same visit, so there is no second trade to book.

The Conduction Company backs that work with its own data cabling and WiFi work. For a TV on the wall with the cables hidden, see The Conduction Company's TV wall mounting page.

Are you facing these AV setup issues?

  • Music too loud in one corner and silent in another
  • A projector running off a trailing lead
  • No HDMI where the screen is
  • Speakers that have stopped working
  • One Sky box that has to reach three TVs
  • An aerial signal that keeps dropping

Most AV problems are cabling and power problems. The Conduction Company is an electrical contractor, so it puts power where the amplifier, projector or screen needs it, runs the speaker and HDMI cable inside the ceiling and walls, and tests the system with you before it hands it over.

Keeping Your Property Safe, Compliant, and Running Smoothly

Electrical systems don’t fail all at once they deteriorate slowly, then break suddenly. Most homeowners only call an electrician when something stops working, but by then the damage is already done: tripped circuits, hot-water failures, overloaded switchboards, or hidden faults that put your family at risk.
‍
Our reliable electrician team in Auckland
handles everything from emergency breakdowns to preventative maintenance, helping Auckland homes stay safe,compliant, and efficient all year round.
A tool belt of insulated screwdrivers in focus while an electrician works on a wall socket behind

Complete TV & AV Solutions in Auckland

The Conduction Company provides professional installation and setup services:

Electrician fitting a round in-ceiling speaker into a suspended office ceiling

Speakers and background music for businesses

The Conduction Company installs in-ceiling speakers and background music systems in Auckland offices and workplaces, with one amplifier driving several zones so each area plays at its own volume. It runs the speaker cable through the ceiling and between floors where it has to, puts power where the amplifier lives, and does the rest of the commercial electrical work on the same site.

Electrician lifting a round in-ceiling speaker into a suspended office ceiling

A Grey Lynn creative agency: music across two floors

In February 2025 a Grey Lynn creative agency wanted the same background music playing across its office, at a volume that suited each area. The Conduction Company installed 12 in-ceiling speakers across two floors, including the open-plan spaces, the cafe and the reception, and drilled the speaker cable between the floors. One 8-zone amplifier in the server room drives them all, so each area plays the same music at its own volume. The speakers went in as part of a larger electrical job at the same office, which The Conduction Company certified on completion.

The Conduction Company has also hung pendant speakers and fitted microphones and panels in an Auckland Central office for an AV company that designed and supplied the system, and installed speakers and an amplifier at a sports club, where the TV's sound could not travel over the Sky cabling and needed its own amplifier.

Two electricians lifting a round in-ceiling speaker up into a hole cut in a ceiling tile

Can you install speakers in an office, cafe or shop?

Yes. The Conduction Company fits speakers into the ceiling, or hangs pendant speakers from an open ceiling, runs the cable back to one amplifier, and puts a dedicated power outlet where the amplifier sits. Where an AV company has already designed your system, The Conduction Company can do the installation for them.

Electrician on a stepladder drilling a round speaker hole in a ceiling with a dust shroud

Can each area have its own volume?

Yes. The Conduction Company installs a multi-zone amplifier, so each pair of speakers has its own volume and an open-plan floor and a reception can play the same music at different levels. The 8-zone amplifier The Conduction Company installed for a Grey Lynn agency can drive up to 16 speakers.

What a commercial speaker system costs

The Conduction Company prices a speaker system on the number of speakers and zones, the ceiling type and whether cable can get between floors, where the amplifier lives, and whether there is power there already.

The estimate below is a worked example of a commercial ceiling speaker system.
The Conduction Company confirms final pricing after a property assessment.

A worked example from The Conduction Company: a two-floor office with 12 ceiling speakers and an 8-zone amplifier came to about $5,800 including GST, supplied and installed.

Projectors for offices and classrooms

The Conduction Company mounts projectors in office and classroom ceilings across Auckland, puts the power at the projector, and runs an HDMI cable down to the desk so a laptop plugs straight in.

Can you mount a projector in a suspended ceiling?

Yes. The Conduction Company does not hang the projector off the ceiling tile: it fixes the mount to timber installed above the tiles, fits a brush plate in the tile with a socket above it so the power cable is hidden, and runs the HDMI cable to the desk. Where there is no ceiling space to work in, the cable runs in surface conduit down the wall instead.

How much does it cost to mount a projector?

The Conduction Company prices it on the ceiling type, how far the HDMI cable has to run, and whether there is power near the projector already.

The estimates below are for mounting a projector in an office or classroom ceiling.
The Conduction Company confirms final pricing after a property assessment.

The Conduction Company's own Auckland price for mounting a projector in an office or classroom ceiling, with power at the projector and an HDMI run to the desk, is $550 to $1,000 including GST.

Hand plugging a cable into an HDMI wall plate low on an office wall

HDMI and AV cabling for meeting rooms

The Conduction Company runs HDMI cable from the table or desk to the screen or projector in Auckland boardrooms, meeting rooms and classrooms, and finishes it at an HDMI wall plate or a brush plate so nothing trails across the floor. Where one laptop feeds two screens, it fits a splitter.

This is often part of a bigger job, such as an office electrical upgrade, when the walls are open and the cable can go inside them. The network side is The Conduction Company's data cabling work.

Electrician pushing a cable rod up through an open ceiling tile in an office

What meeting-room AV cabling costs

The Conduction Company prices it on the number of screens and wall plates, how far the cable runs, and whether the walls are open or already finished.

The estimates below are for standard installation of HDMI and meeting-room AV cabling.
The Conduction Company confirms final pricing after a property assessment.

The Conduction Company's own Auckland price is $600 to $800 including GST for a power outlet and an HDMI cable run from an office monitor to a wall point off to the side, so anyone can plug in a laptop and present on the monitor.

Home theatre installation

The Conduction Company installs home theatre systems in Auckland homes: speakers in the ceiling or walls, speaker cable run back to the receiver, a subwoofer, and power where the equipment lives. It can supply the equipment or install gear you already own, and it agrees speaker positions and cable routes with you before anything is cut.

What a home theatre costs

The Conduction Company prices a home theatre on the number of speakers, whether the room is finished or still open, and whether there is access above the ceiling or under the floor for the cable.

The estimates below are for standard installation of a 5.1 surround sound system, equipment not included.
The Conduction Company confirms final pricing after a property assessment.

The Conduction Company's own Auckland price is $1,500 to $2,000 including GST to install a 5.1 surround sound system: speakers mounted in place, all cabling back to a wall plate behind the receiver or amplifier, and a power outlet installed. The equipment itself is extra, and that is a separate cost from the installation: surround sound systems vary hugely, from around $500 including GST for a basic entry-level system to tens of thousands of dollars for top-end units.

Speakers at home

The Conduction Company replaces old ceiling speakers, installs new in-ceiling speakers, puts power points where wireless speakers need them, and finds out why a speaker has gone quiet. On one Auckland job it replaced two yellowed ceiling speakers, removed old speakers and audio wall plates from rooms that no longer needed them, and set the amplifier up again.

What home ceiling speakers cost

For new in-ceiling speakers, The Conduction Company prices on the number of speakers, whether it can get into the ceiling above them, where the amplifier sits, and how far the cable runs.

The estimates below are for standard installation of home ceiling speakers.
The Conduction Company confirms final pricing after a property assessment.

The Conduction Company's own Auckland price is $1,200 to $1,500 including GST for four mid-range in-ceiling speakers, cabled back to a wall plate behind the receiver or amplifier, fitted off and ready to connect.

Why have my speakers stopped working, or cut out?

The fault can be in the speaker, in the cable run to it, or in the amplifier output driving it, so The Conduction Company traces the cabling from the amplifier to each speaker to find which. On one Auckland surround sound system, the two speakers that had stopped working turned out to be run from a different zone on the amplifier.

Is it safe to use speaker cable for power?

No. Cable used for mains wiring in a home carries an insulation rating of 450/750 V or 600/1000 V marked on its sheath, and NZECP 51 says never to use cables designed for extra-low voltage applications, such as telecommunications cables, in a 230 V installation. Speaker cable is made for audio, not mains power. The Conduction Company has found it used as mains wiring on two Auckland inspections, single insulated, not rated for mains, and a fire and shock risk.

One source, several TVs

The Conduction Company connects one Sky box, media player or aerial to several TVs around a home or business, with an HDMI splitter or matrix and extenders that carry the picture over network cable. It can add an infrared relay, so the remote still works when the box lives in a cupboard.

The Conduction Company can also run the WiFi and data cabling an AV system relies on, and connect it with CCTV systems.

Can one Sky box or media player feed several TVs?

Yes. The Conduction Company fits an HDMI splitter or matrix at the source and runs the signal to each TV, over network cable where the TV is further away. In one Auckland home it replaced a failed four-output HDMI matrix and its transmitters, then tested the picture on every TV. At a dental practice with a TV signal fault across several screens, The Conduction Company traced the cabling back to the amplifier in the data rack and re-terminated a connector that had slipped.

What sending one source to several TVs costs

The Conduction Company prices it on the number of TVs, how far each one is from the source, and whether network cable already runs to them.

The estimates below are for standard installation of HDMI distribution to several TVs.
The Conduction Company confirms final pricing after a property assessment.

The Conduction Company's own Auckland price for HDMI distribution to several TVs is $2,000 to $3,500 including GST. Of that, the hardware (the switch or splitter and the extenders) is roughly $500 including GST. The rest is running the cabling from the central source out to each screen, so the number of screens and the length of the cable runs drive the price.

TV and AV fault finding

When the picture drops out, a TV loses its channels, or the sound stops, The Conduction Company finds out why: the aerial and its cabling, the Sky or Freeview connection, the HDMI run, or the power. What a fault visit costs is in The Conduction Company's guide to TV aerial costs.

The Conduction Company also sets up streaming sticks on older TVs and shows you how to use them.

TV aerials, Freeview and Sky

The Conduction Company installs and replaces TV aerials, runs the cable to the outlet at your TV, and connects Sky satellite feeds. Its guides cover what a TV aerial costs, whether you can install a TV aerial yourself, and whether a smart TV needs an aerial.

TV wall mounting

The Conduction Company mounts TVs on the wall, hides the cables inside it where the wall allows, or in tidy capping where it does not, and installs the outlet behind the screen, all in the same visit. Prices, mounting heights and the rules on TV power cords are on its TV wall mounting and hidden cabling page.

AV and Home Theatre Installation Across Auckland

The Conduction Company installs speakers, projectors, HDMI cabling, home theatre and TV aerials for businesses and homes across Auckland. Its TV wall mounting service puts the TV on the wall with the cables hidden.

Jenny

The electrician was very professional and reliable. We installed timer for hot water cylinder. The price was reasonable with longer period of warranty while the other company only provided 1 year. Would recommend to everyone!

Raewyn

So helpful on the phone, and solved the issue really quickly, it was wonderful. Excellent communication skills, and thorough knowledge of what was probably the issue, sorted out in no time.

Kevin Brooks

Service was great. Before doing job suggested we contact Vector to see if it was their mistake. All communication was great and the young man that did the job was super efficient and helpful, explaining procedure as he went. Highly recommended A1

Tara Jane

So these guys are GREAT. Everyone was helpful, responsive and professional. The job was sorted super quick and my boisterous doggo was given plenty of attention too. Totally recommend them and thanks everyone for being so lovely to deal with.

Laura Worth

Have had a heated towel rail and a tv mount install done, both times the guys were great at communicating at every step and reasonably priced. Will definitely use TCC again!

Tristan

Just a small job of installing a new power outlet and a security light. Superb communication and quality of work. Would definitely use their services again.

Christopher Chen

The Conduction Company was great. Answered every question I had and have had no problems since they installed the ethernet cabling run about 7 months ago

Jim Nathan

My Electric gate would not operate long with the intercom. The team came over in the morning and by lunchtime it was fixed. Could not have been any more pleased ...Team was professional, courteous, fast and all work completed at a great price. I highly recommend them.

Nicole

Had a small job completed, tradesman was on time and completed the the work quickly. Communication was great especially around booking the work in and was kept up to date as to when they would be arriving.

Amy
Wiring Repair

Great service, pricing & communication. Warm & friendly electrician who did a great job repairing and dog-proofing some chewed wires. We have a very lucky (&naughty) dog.

Fiona Lowen

understood our problem, suggested the fix, quoted promptly, did the work without delay. all round good service

Barry O'Connor

I had an urgent job to install Ethernet jacks in 3 rooms in a house I was moving into. The Conduction Company exceeded my expectations from fast install to repositioning the modem for maximum efficiency. Highly recommended a great business to deal with.

Jo

This is the 3rd time we have used this local company & would recommend them . Definitely our 'go to' for any electrical work required.

Donna

Highly recommend The Conduction Company for installing and mounting a tv. Fast and reliable service. Professional people. Great communication and price.

Andrew Dwyer

We had The conduction company involved with our bathroom renovation and we’re stoked with the service! Great communication and workmanship.

Lucy Harding

The team did a great job as usual - on time and done for the same price quoted. Great communication, tidied up afterwards, happy to answer any questions we had. Highly recommend.

Ana Mckearney

Highly recommend The Conduction Company! So organised and clear about everything that needed doing! The guys showed up on time and Reuben was so knowledgeable about our SmartVent system and took the time to explain everything to us!

Louise

Prompt and friendly communication from quoting to completing the work. Storm damaged aerial replaced and working well. Thank you!

Louisa

Great communication - knew that we needed job completed ASAP so they fitted us in around other jobs which was highly appreciated. Professional and friendly

Max

Such a good experience with The Conduction Company - they went above and beyond for us, managing to fit us in at short notice and doing a great job with the whole project, including the numerous parts we added. Really happy with these guys, will be using again for future projects

Frequently Asked Questions

AV & Home Theatre Installation Services in Auckland

Can you install a home theatre in a room that is already finished?

Yes, and the real question is how to get speaker cable to the back of the room. The Conduction Company runs it through the ceiling or under the floor where there is access, and where there is not, we plan the layout around what the room allows rather than cutting into finished linings. Speaker positions and cable routes are agreed with you before anything is opened up.

Do you install TV aerials?

Yes. The Conduction Company installs and replaces TV aerials, mounts them on the barge board, gable, or scotia depending on what the roofline allows, and runs the cabling from the aerial to the outlet at your TV. Where the job also needs a power outlet behind the screen, that is electrical work and we do it in the same visit rather than sending a second trade.

our process

Ready to talk about your next project?

1

Site visit

The Conduction Company walks the space with you and agrees where the speakers, screens and projector go, and where the cable can run.

2

Installation

The Conduction Company runs the cabling, puts in the power, installs the equipment, and certifies the electrical work.

3

Testing and handover

The Conduction Company tests every speaker zone and screen with you, and the workmanship is covered by our Lifetime Workmanship Guarantee.

What affects the cost of AV installation?

The Conduction Company prices AV work on what the job involves: how many speakers, screens or projectors, how many zones, the ceiling and wall construction and whether there is access above or below, how far the cable runs, where the amplifier or source equipment lives, and whether power is already there. Where a section above shows a price, it is The Conduction Company's own Auckland price for that service.

We quote on facts, not guesses

Before we give you a price, we carry out a proper assessment of your property and how you'll use your AV system.
That way you know exactly what you're buying and the total cost, with no surprises.
Clear expectations from the outset, start to finish.

Upgrade your entertainment experience today

The Conduction Company installs TV and AV systems across Auckland, and can take care of the data cabling, the CCTV and the electrical maintenance at the same time.

Backed by our Lifetime Workmanship Guarantee. Get in touch and one of the team will come back to you the same day, depending on staff availability. The Conduction Company is reachable any hour of the day, every day of the week.